Pro-Ject - Stereo Box DS (Integrated Amplifier)
Pro-Ject - Stereo Box DS Integrated Amplifier
The high-performance integrated amplifier features dual-mono amplification topology using the highest quality PWM amplifier modules (two per channel) for audiophile-grade sound. This amplifier is not only powerful but, is capable of driving difficult speaker loads and is stable down into 2 ohm operation.
In addition to four pairs of RCA line level jacks to accommodate a selection of analog inputs, a USB digital input provides easy direct interface with computers. The built-in D/A converter provides superb sound from your computer files and simplifiesinterface and operation. The large and legible display readout provides status of every operational mode and can be read across the room.
The massive metal case shields the internal circuitry form not only detrimental vibrations but also electromagnetic interference. Additionally, the outboard power supply also contributes to the low-noise environment. An IR remote control is supplied.
Output Power: 2 x 40W / 60W at 8 ohms / 4 ohms (both channels driven)
Frequency Response: 10Hz - 50kHz (+0dB/-3dB)
Channel Separation: > 40dB @ 20kHz
Signal to Noise Ratio: > -90dB (IEC -A), THD 26dB
Gain: 2 pr RCA Jacks
Line Level Inputs: 4 pr RCA Jacks
Input Impedance: 100k ohms
USB-Input: USB Mini B Connector, USB cable supplied
D/A Converter: Texas Instruments PCM2706. 16-Bit /48kHz Delta Sigma, 128-times oversampling
Sampling Rates: 44.1kHz and 48kHz
Speaker Connectors: 4mm Banana Jacks, Spade Connectors or Bare Wire
Outboard Power Supply: 24V/5A DC
Power Consumption: 5A DC, <1W standby
Dimensions (WHD): 4.1 x 2.9 x 5.7 in.,103 x 72 x 144 mm
Weight: 2.6lbs., 1,180g without power supply
Finish: Black or Silver
We Also Recommend